Between the 3rd of July and 14th of August we are running a national initiative to promote our partners imagination and initiatives when it comes to installation or application of a Nomad PDU and or accessories.
We encourage you as a consumer, to make suitable comments on this page as we upload the ongoing details and pictures of how our partners have installed or used the Nomad PDU. We are looking for the best install or versatile application of the Nomad PDU. It may be pictures or a short you tube clip and some highlights, such as below.
Post your vote or comments at the bottom of this post, which will be updated daily.
Johny Nomad from Nomad PDU set up above with 2 fridges, one run as a freezer, with his camp oven, cry o-vac and pretty much anything else he thought he could hang off it - Johns not eligible but his set up is simple and easy to install, remove as needed.
Southern Suspension and 4wd
Esperence WA
A couple of great installs, for user simplicity and also illustrates how little room is required for a dual install if you choose to do so, with DCDC charging.
TJM Cairns 04/08/2020
We were always hoping for an install into a Suzuki Jimmy would eventuate, given the limited space and weight restriction, shows that even a jimmy can have as much dual power as a Land cruiser, leaving more space for fridge, camping and fishing gear. with a simple DCDC charge pretty much all you need. Easy to remove, simple tie down strap, which was what the unit was designed to suit.
TJM Cairns 22/07/2020
Custom install
into a VW Amarok, note the position of the DCDC module, fuses and quick
release strap, perfect example of how little space the Nomad PDU Takes
up , giving you plenty of options to securely install but also make it
easy to remove for other applications.
Kununurra 4WD and Spares. WA 16/07/2020
Just a basic install for a rough and tumble D-Max ute.
Simple HD isolator unit and Midi fuse front end, DC charger
permanent mount tub and simple mount point with rubber spacer and matting. Basic but effective with easy remove. Typical Dual Battery set up with the advantages of quick removal, which the Nomad PDU gives you that advantage.
Everything 4WD Victoria 14/07/2020
Very Cool Install into Ford Everest 2018
And in A ford Ranger with quick release lock down strapping. Everything 4wd Victoria
Hall Towbars SA 10/07/2020
Customer had downsized from a Troop Carrier and wanted a secondary
battery system. DC/DC unit fitted in engine bay and Nomad PDU fits in
between seat rails. Retaining straps were installed after Photos taken.
Customer intends to fit a fridge in the back with the rear seats folded down.
Harmac Auto Electrical 10/07/2020
A lovely tidy install with custom bracket in to an Amarok. Harmac are in QLD
Harmac Canopy Install - with DCDC charger set up, again for secure and
easily removable application.
More Impressive Harmac installs.
Pajero Sport - The most important thing to take away from the install is the little space it takes up, no need to upgrade springs and shocks etc just for batteries because of weight, and again easy to remove and use for other applications, and little expense compared to tradition dual set ups. This is exactly what the Nomad PDU was designed for.
Horsham 4x4 and outdoor 02/07/2020
Supplied and installed by Horsham 4x4 & Outdoor. The
Nomad V5 PDU, wired to charge with a DCDC charger. This customer wanted the
unit to be able to be removed with ease but also to be mounted securely enough
that its safe in the tub of the ute. The roller shutter tracks made that
difficult. This unit is housed in a custom built tray so the customer could
remove it with 0 tools required! This tray is also lockable!
Supplied
and installed by Horsham 4x4 & Outdoor. The Nomad V5 PDU, wired to charge
with a DCDC charger. This was a Ford Ranger and the unit can be removed with
ease but is still mounted securely enough that its safe in the tub of the ute.
This unit is housed in a custom built tray so the customer could remove it
with 0 tools required! This tray is also lockable
Supplied and installed by Horsham 4x4 & Outdoor. The
Nomad V5 PDU, wired to charge with a DCDC charger & a roof mounted solar
panel. . This customer wanted the unit to be able to be removed with ease so
when he got to camp he could just lift the unit out. Having the DCDC and solar
Anderson plugs mounted strategically the customer could get his kids to put in and
connect the unit as it was impossible to get it wrong.
Supplied and installed by Horsham 4x4 & Outdoor. The Nomad
V5 PDU, wired to charge with a DCDC charger. This customer wanted the unit to
be able to be removed with ease but also to be mounted securely enough that its
safe in the tub of the ute. The roller shutter tracks made that difficult. This
unit is housed in a customer built tray so the customer could remove it with 0
tools required! This tray is also lockable!
Supplied and installed by Horsham 4x4 & Outdoor. The
Nomad V5 PDU, wired to charge with a DCDC charger. In this customers BT-50 he
wanted the unit to be able to be removed with ease but also to be mounted
securely enough that its safe in the tub of the ute. This unit is housed in a
customer built tray!
Supplied and installed by Horsham 4x4 & Outdoor. The
Nomad V5 PDU, wired to charge with a DCDC charger. This customer wanted it to
sit flush with his draws and the outlets just above the draws so he could cut
out his wing kit around the box for a VERY neat finish. Again this unit could
be removed with easy but is mounted very securely.
Horsham 4X4 and Outdoor, Vic 16/07/2020
The Nomad V5 PDU has been wired to charge with a DCDC
charger. This customer wanted the unit to be able to be removed with ease so he
can put it between vehicles. This unit is housed in a custom built tray so the
customer could remove it with 0 tools required! This tray is also lockable!
No comments:
Post a comment